6.6. pyopus.design.yt
— Yield targeting (design for yield)¶
Cornersbased design (PyOPUS subsystem name: YT)
Finds the circuit’s design parameters for which the worstcase performances (within beta of the statistical parameters origin) satisfy the design requirements. beta specifies the target yield through the following equation.
Y = 0.5 beta ( 1 + erf( beta / sqrt(2) ) )

class
pyopus.design.yt.
YieldTargeting
(paramSpec, statParamSpec, opParamSpec, heads, analyses, measures, corners=None, fixedParams={}, variables={}, beta=3.0, wcSpecs=None, norms=None, failurePenalty=1000000.0, tradeoffs=0.0, stopWhenAllSatisfied=None, initial=None, initialNominalDesign=True, forwardSolution=True, initialCbdOptions=None, firstPassCbdOptions=None, cbdOptions={}, wcOptions={}, cornerTol=0.01, angleTol=10, debug=0, spawnerLevel=1)¶ paramSpec is the design parameter specification dictionary with
lo
andhi
members specifying the lower and the upper bound.statParamSpec is the statistical parameter specification dictionary with
lo
andhi
members specifying the lower and the upper bound.opParamSpec is the operating parameter specification dictionary with
lo
andhi
members specifying the lower and the upper bound. The nominal value is specified by theinit
member.See
PerformanceEvaluator
for details on heads, analyses, measures, corners, and variables.Fixed parameters are given by fixedParams  a dictionary with parameter name for key and parameter value for value. Alternatively the value can be a dictionary in which case the
init
member specifies the parameter value.If fixedParams is a list the members of this list must be dictionaries describing parameters. The set of fixed parameters is obtained by merging the information from these dictionaries.
beta is the spehere radius within which the worst case is sought. It defines the target yield.
wcSpecs is the list of worst cases to compute in the form of a list of (name, type) pairs where name is the performance measure name an type is either
upper
orlower
. If a specification is just a string it represents the performance measure name. In that case the type of the specification is obtained from the measures structure (thelower
and theupper
member of a performance measure description dictionary). If wcSpecs is not specified the complete list of all performance measures is used and the presence of thelower
and theupper
member in the performance measure description dictionary specifies the type of the worst case that is considered in the process of yield targetting.See
CornerBasedDesign
for details on norms, failurePenalty, tradeoffs, and stopWhenAllSatisfied.initial is a dictionary of initial design parameter values. If not aspecified the mean of the lower and the upper bound are used.
If initialNominalDesign is
True
an initial design in the nominal corner is performed usingCornerBasedDesign
class and the resulting design parameter values are used as the initial point for yield targeting. initial is used as the strating point for the nominal design.If forwardSolution is
True
the solution of previous pass is used as the initial point for the next pass.initialCbdOptions is a dictionary of options passed to the
CornerBasedDesign
object at its creation in initial nominal design. These options define the behavior of the sizing across corners. If not given cbdOptions are used.firstPassCbdOptions is a dictionary of options passed to the
CornerBasedDesign
object at its creation in the first pass. These options define the behavior of the sizing across corners in the first pass. If not specified cbdOptions are used.cbdOptions is a dictionary of options passed to the
CornerBasedDesign
object at its creation. These options define the behavior of the sizing across corners.wcOptions is a dictionary of options passed to the
WorstCase
object. These options define the behavior of the worst case analysis.cornerTol is the relative tolerance for determining if two corners are almost equal. The absolute tolerance for the norm of the vector of statistical parameters is obtained by multiplying this value with beta. The absolute tolerance for operating parameters is obtained by multiplying the lowhigh range with cornerTol.
angleTol is the angular tolerance in degrees for determining if two sets of statistical parameters are almost equal.
debug turns on debugging.
Setting spawnerLevel to a value not greater than 1 distributes the evaluations across available computing nodes. This argument is forwarded to the
CornerBasedDesign
and theWorstCase
objects.This is a callable object with no arguments. The return value is a tuple comprising a dictionary with the final values of the design parameters, the
Aggregator
object used for evaluating the final result across all relevant corners, theWorstCase
object used for computingthe final worst case performance, and the total dictionary holding the number of all analyses performed.Objects of this type store the number of analyses performed during the last call to the object in the
analysisCount
member. The lastAggregator
object and the lastWorstCase
object are stored in theaggregator
and thewc
member. The resulting set of design parameters is stored in theatParam
member.