10.6.1. Simulator input files (Spice Opus)ΒΆ

The circuit we are going to simulate is a Miller OpAmp. In the folder with the demo there are two files: pyopus.lib and pyopus.dcm) with the symbol definitions for the KiCad schematic editor. The amplifier schematic is in the miller.sch in folder demo/design/miller/.

_images/design-miller.png

Miller OpAmp schematic.

We can see that all transistor dimensions, as well as the bias current, compensation resistor, and compensation capacitor are parameterized. We are going to use wrappers for builtin MOS devices so that we can model transistor’s mismatch parameters. The two wrappers are defined in file mosmm.inc in folder demo/design/miller/.

* Mismatch model of NMOS and PMOS, Spice Opus
*   w, l, m    ... MOS parameters
*   vtmm, u0mm ... normalized mismatch (+1 means +1 sigma)

.subckt submodn drain gate source bulk param: w l m=1 vtmm=0 u0mm=0
.param sqrtarea=sqrt(w*l*m)
.param vvt=vtmm*(5e-3*1e-6/sqrtarea/sqrt(2))
.param vu0r=u0mm*(1.04e-2*1e-6/sqrtarea/sqrt(2))
vgmm (gate gate_int) dc={vvt}
m0 (drain gate_int source bulk) nmosmod w={w*(1+vu0r)} l={l} m={m} ad={w*0.18u} as={w*0.18u} pd={2*(w+0.18u)} ps={2*(w+0.18u)} nrs={0.18u/w} nrd={0.18u/w}
.ends

.subckt submodp drain gate source bulk param: w l m=1 vtmm=0 u0mm=0
.param sqrtarea=sqrt(w*l*m)
.param vvt=vtmm*(5.49e-3*1e-6/sqrtarea/sqrt(2))
.param vu0r=u0mm*(0.99e-2*1e-6/sqrtarea/sqrt(2))
vgmm (gate gate_int) dc={vvt}
m0 (drain gate_int source bulk) pmosmod w={w*(1+vu0r)} l={l} m={m} ad={w*0.18u} as={w*0.18u} pd={2*(w+0.18u)} ps={2*(w+0.18u)} nrs={0.18u/w} nrd={0.18u/w}
.ends

By default the netlister generates simulator’s built-in MOS devices for every MOS symbol in the schematic. Instead we would like it to generate subcircuit instances that use the two definitions from mosmm.inc. Beside that we want to add two mismatch parameters to every transistor. To achieve this we customize the netlister’s behavior with file netlister.json in folder demo/design/miller/.

{
        "Mapping": [
		[
			null, "PMOS",
			{
				"Parameters": [ "w", "l", "m" ],
				"OutPattern": "#REF() (#PINS()) #MODEL() #PARAM() #PNV() vtmm={#REFORIG()vt} u0mm={#REFORIG()u0} #PV(Specification)",
				"SpiceDevice": "subcircuit",
				"PinMap": [ 1, 2, 3, 4 ],
				"NamePrefix": "X",
				"ValueField": null
			}
		],
		[
			null, "NMOS",
			{
				"Parameters": [ "w", "l", "m" ],
				"OutPattern": "#REF() (#PINS()) #MODEL() #PARAM() #PNV() vtmm={#REFORIG()vt} u0mm={#REFORIG()u0} #PV(Specification)",
				"SpiceDevice": "subcircuit",
				"PinMap": [ 1, 2, 3, 4 ],
				"NamePrefix": "X",
				"ValueField": null
			}
		]
	]
}

This file defines the instance name prefix to be X (NamePrefix) and adds two parameters named vtmm and u0mm to every MOS isntance. The values of the two parameters are specified by parameters of the form <instance_name>vt and <instance_name>u0. If mismatch effects are not to be simulated these two parameters should be set to their default values (0). The actual built-in MOS instance is transistor M0 in every subcircuit instance generated by the netlister.

After netlisting the following netlist is obtained in file miller.inc in folder demo/design/miller/.

*********
* SPICE OPUS netlister for KiCad
* (c)2017 EDA Lab FE Uni-Lj
*
* Netlister : KiCad -> Spice Opus
* Config    : /mnt/data/Data/pytest/demo/design/miller/netlister.json
* Source    : /mnt/data/Data/pytest/demo/design/miller/miller.sch
* XML input : /mnt/data/Data/pytest/demo/design/miller/miller.xml
* Output    : /mnt/data/Data/pytest/demo/design/miller/miller.inc
* Date      : Thu 23 Aug 2018 11:57:27 AM CEST
* Tool      : Eeschema 4.0.5+dfsg1-4
* Sheet 1   : / -- miller.sch
*********

.include mosmm.inc

.subckt miller inp inn out vdd vss

* Sheet: /
xmn4 (net001 net003 vss vss) submodn param: w={mirr_wd} l={mirr_ld} m=1 vtmm={mn4vt} u0mm={mn4u0} 
xmn3 (net003 net003 vss vss) submodn param: w={mirr_w} l={mirr_l} m=1 vtmm={mn3vt} u0mm={mn3u0} 
xmn5 (out net003 vss vss) submodn param: w={mirr_wo} l={mirr_l} m=1 vtmm={mn5vt} u0mm={mn5u0} 
xmp1 (net005 net005 vdd vdd) submodp param: w={load_w} l={load_l} m=1 vtmm={mp1vt} u0mm={mp1u0} 
xmp2 (net002 net005 vdd vdd) submodp param: w={load_w} l={load_l} m=1 vtmm={mp2vt} u0mm={mp2u0} 
xmp3 (out net002 vdd vdd) submodp param: w={out_w} l={out_l} m=2 vtmm={mp3vt} u0mm={mp3u0} 
i1 (vdd net003)  dc={ibias}
r1 (out net004) r={r_out} 
c1 (net004 net002) c={c_out} 
xmn1 (net005 inn net001 vss) submodn param: w={diff_w} l={diff_l} m=1 vtmm={mn1vt} u0mm={mn1u0} 
xmn2 (net002 inp net001 vss) submodn param: w={diff_w} l={diff_l} m=1 vtmm={mn2vt} u0mm={mn2u0} 

.ends

The top-level circuit schematic for the operating point, DC, AC, noise, and transient analysis is defined in file topdc.sch in folder demo/design/miller/.

_images/design-miller-topdc.png

Miller Top level circuit for dc, transient, and ac analysis.

Note that we must suppress the netlister from adding .end to the netlist because the top-level circuit will be one of the include files in the top-level netlist. In this circuit the power supply (Vdd1), transient excitation (Vin1), common mode source (Vcom1), feedback (R1, R2), and load (Cl1, Rl1) load are parameterized. The amplifier output is separated from the feedback with a voltage-controlled voltage source so that the feedback circuit does not pose as an addittional load for the amplifier output. After netlisting the topdc.inc include file is obtained.

The top-level circuit schematic for computing rejection rations is defined in file toprr.sch in folder demo/design/miller/.

_images/design-miller-toprr.png

Miller Top level circuit for ac analyses on which PSRR and CMRR computations are based.

For computing the rejection ratios we must obtain the gain from the power supplies (Vdd1, Vss1) and the common mode source (Vcom1) to the circuit’s output. Capacitor Cin1 separates the differential excitation from shorting the DC feedback (R2) that forces the amplifier’s operating point to be in the middle of the active region. Its value is determined by the cin parameter which is chosen to be large so that the effect of the separation vanishes quickly with the increasing frequency. After netlisting the toprr.inc include file is obtained.